Courses

Course Code: SF6-GHM
Course Objective: This course aims to create a better understanding for gas handlers or technicians on SF6 gas properties, safer way of handling SF6 gas by practicing the correct procedures of filling & reclaiming the gases from switchgears and the ability to measure and analyze SF6 gas results. Participants will obtain a competency certification from DILO-Germany upon completion of the full course and pass the examination.
Duration: 5 days

Theory syllabus as per DILO-GERMANY requirements

• Environmental issues, definitions and regulations
• Physical, chemical and environmental characteristics of SF6 gas
• Personnel safety and first aid requirements
• Design and use of SF6 gas in electric power equipment
• Handling of gas during installation, testing and commissioning of switchgear
• Management of SF6 gas
• SF6 gas recording and monitoring of SG6 gas usage
• Real hands-on practical

Click here to download the Leaflet course information.

Course Code: CM-H1
Course Objective: This course aims to provide participants with the knowledge of HV electrical safety rules and the operations and procedures of handling high voltage switchgears and its accessories.
Duration: 7 days

*EIU Mandatory Requirements
*Any substation, building or premises incorporated with high voltage switchgears require a competency Chargeman H1 to handle and operate the systems.

Theory syllabus as per Electrical Inspector Unit (EIU) requirements:

• Voltage Higher than Low Voltage (up to 33 kV) Electrical Substation & Auxiliaries
• HV Distribution System
• Power System Protection
• Power Transformer
• Type of Substation, Design & Protection Relays
• HV System Testing
• Real hands-on practical

Click here to download the Leaflet course information.

Course Code: CM-L1
Course Objective: This course aims to provide participants with the knowledge of building electrical operation and the correct procedures of handling main switchboard (fault troubleshooting & supply restoration), and other building related services such as aircon system, fire fighting system, motor starter and so on.
Duration: 15 weekdays (Mon to Fri) or 6 weekends (Sat & Sun), or, 3 months

*EIU Mandatory Requirements
*Any building incorporated with electrical incoming main switchboard require a competency Chargeman L1 to handle and operate the systems.

Theory syllabus as per Electrical Inspector Unit (EIU) requirements:

• Electricity Ordinance
• Electricity Rules 1999
• IEE Wiring Regulations
• Fire Fighting
• Protection Equipment In Low Voltage Installation
• Electrical Basic
• Transformer
• Cables
• Underground Cables
• Motor & Controlling Equipment
• Battery
• Measurement and Testing Equipment
• Air-conditioner
• Main Switchboard Equipment Checking
• Consumer Installations
• Street Lighting
• Grid Connected Photovoltaic (PV) System
• Real hands-on practical

Click here to download the Leaflet course information.

Course Code: OGPV
Course Objective: This course offered to those who want to enhance knowledge on Off-Grid solar PV systems and the design of Off-Grid PV Systems which include solar PV modules, inverter and associated equipment that is suitable for Malaysia climate condition.

This course covers:

• Design of off-grid  PV systems which include solar PV modules, inverter and associated equipment that is suitable for Malaysia climate conditions.
• Information about off-grid solar PV systems.
• Relevant Malaysian requirements and standards for an off-grid PV system.

Duration: 10 Days (Theory & Practical)

*SEDA Mandatory Requirements
*Any person dealing with Off-Grid Solar PV system design require this competency for the system design, testing & commissioning, as well as acceptance test.

Course Content:

Chapter 1: Overview of Off-Grid Photovoltaic Systems
Chapter 2: Review of Basic Electricity
Chapter 3: Basic Solar Engineering
Chapter 4: Photovoltaic Technology
Chapter 5: Balance of Systems Components
Chapter 6: Design and Sizing of Requirement to Resource
Chapter 7: Design of BOS Components
Chapter 8: Installation, Testing, Commissioning, Acceptance
Chapter 9: Lightning protection system

Click here to download the Leaflet course information.

Course Code: CM-L3
Course Objective: This course aims to provide participants with the knowledge of generator set (GENSET) operation and synchronizing.
Duration: 4 days

*EIU Mandatory Requirements
*Any building incorporated with a genset require a competency Chargeman L3 to handle and operate the systems.

Theory syllabus as per Electrical Inspector Unit (EIU) requirements:

• Low Voltage Generating Stations
• Synchronizing Power Generation and Purpose of Synchronizing
• Factors Related to Synchronizing Process
• Synchronizing Operation
• Real hands-on practical

Click here to download the Leaflet course information.

Course Code: FA
Course Objective: This course is to train any person to become a qualified First Aider. Participants will be taught on basic life support skill such as CPR and other first aid related topics such as bleeding & wounds, burn, fracture, spinal injuries and etc.

Duration: 2 days (Theory & Practical)

*First Aid Certificate is mandatory requirement for Renewal of EIU Competency Certification

Course Code: CM-L4
Course Objective: This course aims to provide participants with the knowledge of standalone photovoltaic system.
Duration: 5 days

*EIU Mandatory Requirements
*Any person working with standalone system installation require a competency Chargeman L4 to handle and operate the systems.

Theory syllabus as per Electrical Inspector Unit (EIU) requirements:

• Trade Orientation & Electrical Safety
• Renewable Energy & Principles of Solar Energy
• Stand-alone PV System and Hybrid System
• Building Systems
• Installation of PV System
• Testing & Commissioning
• Real hands-on practical

Click here to download the Leaflet course information.

Course Code: WM-G1
Course Objective:   This course aims to provide participants with the knowledge of three phase electrical wiring for domestic installation.
Duration: 5 weekdays (Mon to Fri) or 6 weekends (Sat & Sun), or, 3 months

*EIU Mandatory Requirements
*Any person working with three phase wiring installation require a competency Wireman G1.

Theory syllabus as per Electrical Inspector Unit (EIU) requirements:

• Current Carrying Conductors
• Types of Wiring (Wiring system
• Single and Three Phase Distribution
• Circuit Protection System
• Testing of Installation (Single and Three Phases)
• Types, uses and care of AC Motors
• Starters amid Control of Electric Motors
• Principles and applications of simple
• Control devices
• Real hands-on practical

Click here to download the Leaflet course information.

Course Code: WM-G2
Course Objective: This course aims to provide participants with the knowledge of single phase electrical wiring for domestic installation.
Duration: 7 week days (Mon to Sun) or 6 weekends (Sat & Sun), or, 3 months

*EIU Mandatory Requirements
*Any person working with single phase wiring installation require a competency Wireman G2.

Theory syllabus as per Electrical Inspector Unit (EIU) requirements:

• Electricity Ordinance Chapter 50
• Trade Orientation and Electrical
• Basic Electricity
• Supply System
• Consumer’s Circuit
• Conductors and Cables
• Wiring System
• Wiring Accessories
• Earthing
• Domestic Apparatus
• Illumination
• Real hands-on practical

Click here to download the Leaflet course information.

Course Code: ATT
Course Objective: This course aims to authorize participants with the competency in performing inspection and testing for a completed wiring installation.
Duration: 2 days (Theory & Practical)

*EIU Mandatory Requirements
*Any electrical contractor doing inspection & testing for wiring installation require a competency Authorized-To-Test.

Theory syllabus as per Electrical Inspector Unit (EIU) requirements:

• Theory: Electrical Safety Rules, Sizing of Conductors, Electrical Accidents, Inspection & Testing, CPR, Overcurrent & Earth Fault Protection Devices.
• Practical: Identify defects/faults for electrical wiring bay
• Practical: Perform inspection & testing on completed wiring installation.

Click here to download the Leaflet course information.

Course Code: BCEW
Course Objective: This course aims to provide participants with the competency to be a licensed electrical contractor for wiring installation works.
Duration: 4 days

*EIU Mandatory Requirements
*Any electrical contractor dealing with wiring installation require a competency BCEW.

Theory syllabus as per Electrical Inspector Unit (EIU) requirements:

• Electricity Ordinance and Rules
• Trade Orientation and Electrical Safety
• Wiring Practice
• Single and Three Phase Supply System
• Lighting
• Generators
• Motor
• Switchgear & Protection
• Low Tension Overhead Lines
• Underground Cables
• Consumer’s Apparatus & Equipment
• Lightning Protection Systems

Click here to download the Leaflet course information.